Product Information
H2-758
1,Overview
H2-758 is a new hybrid servo driver successfully developed by Leadshine Company based on more than ten years
of stepping and servo research and development experience. It adopts the latest special motor control DSP chip
and vector closed-loop control technology, so as to completely overcome the problem of open-loop stepping motor
losing step. At the same time, it can obviously improve the high speed performance of the motor, reduce the
heating degree of the motor and reduce the vibration of the motor, so as to improve the processing speed and
accuracy of the machine and reduce the energy consumption of the machine. In addition, when the motor is
continuously overloaded, the driver will output an alarm signal, with the same reliability as the AC servo system.
The mounting dimensions of the H2-758 adaptive motor are fully compatible with the traditional 86 series stepper
motors, which are easy to upgrade and cost only 50% of the traditional AC servo system.
2,Technical Feature
New 32-bit motor control special DSP chip;
Adopt advanced vector type closed-loop control technology;
Has trapezoidal wave test function;
Static current and dynamic current can be arbitrarily set (0-- 8A range);
Can drive 86 series of hybrid servo motor;
Photocoupler isolated differential signal input;
Pulse response frequency 200KHz;
Subdivision setting (200~51200);
Has the protection of overcurrent, overvoltage and tracking error.
Six digital tube display, easy to set parameters and monitor motor running status
3,Application area
Suitable for all kinds of automatic equipment and instruments requiring large torque, such as: engraving machine,
wire stripper, marking machine, cutting machine, laser photoprinter, plotter, CNC machine tools, flying needle testing
machine, automatic assembly equipment, etc. The application effect is especially good in the equipment with low
noise and high speed expected by users.
H2-2206
1,Overview
H2-2206 is a new simple servo driver successfully developed by Leadshine Company based on more than ten years
of stepping and servo research and development experience. It adopts the latest special motor control DSP chip and
applies vector closed-loop control technology, so as to completely overcome the problem of open-loop stepping
motor losing step. At the same time, it can obviously improve the high speed performance of the motor, reduce
the heating degree of the motor and reduce the vibration of the motor, so as to improve the processing speed and
accuracy of the machine and reduce the energy consumption of the machine. In addition, when the motor is
continuously overloaded, the driver will output an alarm signal, with the same reliability as the AC servo system.
The h2-2206 adaptor is fully compatible with conventional 86 and 110 series stepper motors. Traditional stepper
drive solutions are easy to upgrade and cost only 50% of traditional AC servo systems.
2,Technical Feature
New 32-bit motor control special DSP chip;
Adopt advanced vector type closed-loop control technology;
Has trapezoidal wave test function;
Output current automatically adjusted (0-- 6A range);
Can drive 86 and 110 high voltage hybrid servo motor;
Photocoupler isolated differential signal input;
Pulse response frequency 200KHz;
Subdivision setting (200~51200);
Has the protection of overcurrent, overvoltage and tracking error.
Six digital tube display, easy to set parameters and monitor motor running status
3,Application area
Suitable for all kinds of automatic equipment and instruments requiring large torque, such as: engraving machine,
wire stripper, marking machine, cutting machine, laser photoprinter, plotter, CNC machine tools, flying needle testing
machine, automatic assembly equipment, etc. The application effect is especially good in the equipment with low
noise and high speed expected by users.
HBS1108S
1,Overview
HBS1108S is a new simple servo driver successfully developed by Leadshine Company based on more than ten
years of stepping and servo research and development experience. It adopts the latest special motor control DSP
chip and applies vector closed-loop control technology, so as to completely overcome the problem of open-loop
stepping motor losing step. At the same time, it can obviously improve the high speed performance of the motor,
reduce the heating degree of the motor and reduce the vibration of the motor, so as to improve the processing
speed and accuracy of the machine and reduce the energy consumption of the machine. In addition, when the
motor is continuously overloaded, the driver will output an alarm signal, with the same reliability as the AC servo
system. HBS1108S adaptor motor mounting dimensions are fully compatible with traditional 86 series stepper
motors. Traditional stepper drive solutions are easy to upgrade, and the cost is only 50% of that of traditional AC
servo systems.
2,Technical Feature
New 32-bit motor control special DSP chip;
Adopt advanced vector type closed-loop control technology;
Has trapezoidal wave test function;
Static current and dynamic current can be arbitrarily set (0-- 8A range);
Can drive 86 series simple servo motor;
Photocoupler isolated differential signal input;
Pulse response frequency 200KHz;
Subdivision setting (200~51200);
Has the protection of overcurrent, overvoltage and tracking error.
Six digital tube display, easy to set parameters and monitor motor running status
3,Application area
Suitable for all kinds of automatic equipment and instruments requiring large torque, such as: engraving machine,
wire stripper, marking machine, cutting machine, laser photoprinter, plotter, CNC machine tools, flying needle testing
machine, automatic assembly equipment, etc. The application effect is especially good in the equipment with low
noise and high speed expected by users. ![Hot Sell Original Leadshine Brand H2-758 H2-2206 Hbs1108s Hybrid Servo Motor and Driver and Cable Hybrid Stepping Motor for CNC Router](//www.micstatic.com/athena/img/transparent.png)
![Hot Sell Original Leadshine Brand H2-758 H2-2206 Hbs1108s Hybrid Servo Motor and Driver and Cable Hybrid Stepping Motor for CNC Router](//www.micstatic.com/athena/img/transparent.png)
![Hot Sell Original Leadshine Brand H2-758 H2-2206 Hbs1108s Hybrid Servo Motor and Driver and Cable Hybrid Stepping Motor for CNC Router](//www.micstatic.com/athena/img/transparent.png)
![Hot Sell Original Leadshine Brand H2-758 H2-2206 Hbs1108s Hybrid Servo Motor and Driver and Cable Hybrid Stepping Motor for CNC Router](//www.micstatic.com/athena/img/transparent.png)
![Hot Sell Original Leadshine Brand H2-758 H2-2206 Hbs1108s Hybrid Servo Motor and Driver and Cable Hybrid Stepping Motor for CNC Router](//www.micstatic.com/athena/img/transparent.png)
1.About us
We are in Jinan, Shan Dong, which is the hometown of CNC Router. We are focus on CNC Machine Parts.
We've been in this business for more than 10 years.
2.What products do we have?
We have many CNC Machine Parts , include Spindle,Inverter,stepper motor,driver,guide rail,sliding block,
rack,gear box,water pump,dust collector,coupling,tool-setter,tool cutter. And so on ...
3.How we guarantee the quality of the products?
Each batch of products will pass the test before leaving the factory.
Before delivery, we will check the list one by one.
4.Why you should choose us?
We are focus on CNC Router Parts more than 10years. We can provide you with the overall solution, We
can offer you many type CNC products.Just tell us which you need , we will provide you as the best price
and the best quality and service.
5.What's the payment term?
We normally accept T/T, Western Union, L/C, and Paypal.
6.What about the shipping ?
We support multiple modes of transportation,such as by express,by air,by sea,by rail and so on.
Also can shipping by DHL\FedEx\TNT\UPS\EMS and so on.
We can offer different type transactions: FOB\EXW\FCA\DAP\CIF.
We can also help you to keep other suppliers goods at our warehouse and shipping together.
7.How to place an order?
Just tell us what you need , then we can make a Invoice for you. If all OK , then make the order and we
shipping to you the goods ASAP.
In order to ensure that all products are what you need, we will show you the pictures, drawings, videos
and so on before shipping .
8.What about the delivery time?
We have a large warehouse and most of our goods are in stock.When you have order, we can shipping
the goods fast.
Generally speaking, the time from our warehouse to the forwarder is about two days, and then the goods
can be sent by DHL FedEx UPS TNT to you.