Product Information
MS-S3 belongs to easy servo (servo-stepper) drives. With new generation of 32-bit
DSP motor control technology, which completely overcomes the problem of lost step of
open-loop stepping motor, MS-S3 greatly improves the high and low speed performance
and torque utilization rate of stepping motor, and effectively reduces motor heat.
The servo stepper drive system combines the advantages of open-loop stepper and
servo control, and is particularly suitable for the upgrade of open-loop stepper drive
control and the cost reduction of traditional servo control.
Feature
Digital PI current loop, low noise.
Three operating modes:
- Self-operating mode: The motor can be triggered by a pulse signal. When the pulse signal optocoupler is turned on, the motor starts self-run according to the parameter setting of PA-45~PA-53; when it is turned off,the motor stops self-running.
- Open loop mode: for testing and emergency use. The motor temperature rise is higher.
- Position mode: This mode is the default mode of the drive and is suitable for most occasions. When the driver works in this mode, the motor does not lose step, the temperature is low, and the high and low speed performance are better than the open loop mode.
l The microstep setting can be any number between 400-60000.
l Protection functions such as overcurrent, phase error, overvoltage and position deviation error.
6 digital LED display, which can easily set parameters and monitor motor running status.
Pulse command averaging filter, the filter can turn the curve without acceleration and deceleration into a trapezoidal acceleration/deceleration curve,which greatly smoothes the motion. The trapezoidal acceleration/deceleration curve is filtered to become a smoother S-shaped acceleration/deceleration curve. Especially suitable for point-to-point sports occasions.
Three types of pulse command: pulse + direction, double pulse(CW/CCW) and quadrature input.
Matching Motors'Model:
| Driver Model |
Motor Model |
Max.output torque |
| MS-S3 |
YK286EC80A1 |
4N.m |
| YK286EC118A1 |
8N.m |
| YK286EC156A1 |
12N.m |
Electrical Indicators:
| parameter |
MS-S3 |
| |
Min value |
Typical value |
Max. value |
Unit |
| Contiuous output current input power voltage |
0 |
/ |
|
A |
| 24 |
70 |
|
Vac |
| Logic input currrent |
7 |
100 |
20 |
mA |
| Pulse frequency |
|
/ |
200 |
kHz |
| Insulation resistance |
500 |
/ |
/ |
MΩ |
Terminal Definition:
| Termind NO. |
Symbol |
Name |
Instruction |
| 1 |
|
Power input termind
Motor current cables |
connect with AC4V-80V connect with red motor wice |
| 2 |
AC |
|
| 3 |
A+ |
|
| 4 |
A- |
connect with blue motor wice |
| 5 |
B+ |
connect with green motor wice |
| 6 |
B- |
connect with biack motor wice |
Application field
Mainly used in robots, industrial robot arms, engraving machines, wire stripping machines,marking machines,
cutting machines, plotters, CNC machine tools, automatic assembly equipment and pattern machines.
1.About us
We are in Jinan, Shan Dong, which is the hometown of CNC Router. We are focus on CNC Machine Parts.
We've been in this business for more than 10 years.
2.What products do we have?
We have many CNC Machine Parts , include Spindle,Inverter,stepper motor,driver,guide rail,sliding block,
rack,gear box,water pump,dust collector,coupling,tool-setter,tool cutter. And so on ...
3.How we guarantee the quality of the products?
Each batch of products will pass the test before leaving the factory.
Before delivery, we will check the list one by one.
4.Why you should choose us?
We are focus on CNC Router Parts more than 10years. We can provide you with the overall solution, We
can offer you many type CNC products.Just tell us which you need , we will provide you as the best price
and the best quality and service.
5.What's the payment term?
We normally accept T/T, Western Union, L/C, and Paypal.
6.What about the shipping ?
We support multiple modes of transportation,such as by express,by air,by sea,by rail and so on.
Also can shipping by DHL\FedEx\TNT\UPS\EMS and so on.
We can offer different type transactions: FOB\EXW\FCA\DAP\CIF.
We can also help you to keep other suppliers goods at our warehouse and shipping together.
7.How to place an order?
Just tell us what you need , then we can make a Invoice for you. If all OK , then make the order and we
shipping to you the goods ASAP.
In order to ensure that all products are what you need, we will show you the pictures, drawings, videos
and so on before shipping .
8.What about the delivery time?
We have a large warehouse and most of our goods are in stock.When you have order, we can shipping
the goods fast.
Generally speaking, the time from our warehouse to the forwarder is about two days, and then the goods
can be sent by DHL FedEx UPS TNT to you.
){kind=link}