Product Information
YAKO MS-S3 Motor
MS-S3 belongs to easy servo (servo-stepper) drives. With new generation of 32-bit DSP motor control
technology,which completely overcomes the problem of lost step of open-loop steppingvmotor, MS-S3
greatly improves the high and low speed performance and torque utilization rate of stepping motor, and
effectively reduces motor heat.
The servo stepper drive system combines the advantages of open-loop stepper and servo control,and is
particularly suitable for the upgrade of open-loop stepper drive control and the cost reduction of traditional
servo control.
Feature
- Digital PI current loop, low noise.
-Three operating modes:
- Self-operating mode: The motor can be triggered by a pulse signal. When the pulse signal optocoupler is
turned on,the motor starts self-run according to the parameter setting of PA-45~PA-53; when it is turned off,
the motor stops self-running.
- Open loop mode: for testing and emergency use. The motor temperature rise is higher.
- Position mode: This mode is the default mode of the drive and is suitable for most occasions. When the driver
works in this mode, the motor does not lose step, the temperature is low, and the high and low speed performance
are better than the open loop mode.
-The microstep setting can be any number between 400-60000.
- Protection functions such as overcurrent, phase error, overvoltage and position deviation error.
6 digital LED display, which can easily set parameters and monitor motor running status.
-Pulse command averaging filter, the filter can turn the curve without acceleration and deceleration into a trapezoidal
acceleration/deceleration curve,which greatly smoothes the motion. The trapezoidal acceleration/deceleration curve is
filtered to become a smoother S-shaped acceleration/deceleration curve. Especially suitable for point-to-point sports
occasions.
-Three types of pulse command: pulse + direction, double pulse(CW/CCW) and quadrature input.
| Technical data |
| Number of phase |
2 |
Phase current |
6A |
The rotor inertia |
3.2Kg.cm² |
| Step from the Angle of |
1.8° |
The phase resistance |
0.52Ω |
Radial runout |
Max0.02mm(450gload) |
| Insulation resistance |
100MΩMIN,500VDC |
The phase inductance |
4.7mH |
The axial runout |
Max0.08mm(450gload) |
| Insulation class |
B |
Keep the torque |
8.2N.m |
The weight of the |
4.5Kg |
1.About us
We are in Jinan, Shan Dong, which is the hometown of CNC Router. We are focus on CNC Machine Parts.
We've been in this business for more than 10 years.
2.What products do we have?
We have many CNC Machine Parts , include Spindle,Inverter,stepper motor,driver,guide rail,sliding block,
rack,gear box,water pump,dust collector,coupling,tool-setter,tool cutter. And so on ...
3.How we guarantee the quality of the products?
Each batch of products will pass the test before leaving the factory.
Before delivery, we will check the list one by one.
4.Why you should choose us?
We are focus on CNC Router Parts more than 10years. We can provide you with the overall solution, We
can offer you many type CNC products.Just tell us which you need , we will provide you as the best price
and the best quality and service.
5.What's the payment term?
We normally accept T/T, Western Union, L/C, and Paypal.
6.What about the shipping ?
We support multiple modes of transportation,such as by express,by air,by sea,by rail and so on.
Also can shipping by DHL\FedEx\TNT\UPS\EMS and so on.
We can offer different type transactions: FOB\EXW\FCA\DAP\CIF.
We can also help you to keep other suppliers goods at our warehouse and shipping together.
7.How to place an order?
Just tell us what you need , then we can make a Invoice for you. If all OK , then make the order and we
shipping to you the goods ASAP.
In order to ensure that all products are what you need, we will show you the pictures, drawings, videos
and so on before shipping .
8.What about the delivery time?
We have a large warehouse and most of our goods are in stock.When you have order, we can shipping
the goods fast.
Generally speaking, the time from our warehouse to the forwarder is about two days, and then the goods
can be sent by DHL FedEx UPS TNT to you.
){kind=link}